T&T: amp hour meter for battery monitor

[Chuck and Susan]

Joe, Hope you did not install the BMV
shunt in the positive cable since it
goes in the negative
cable between the battery and the ground load. Chuck

To
follow our adventures, go to
http://trawler-beach-house.blogspot.com/
http://sea-trek.blogspot.com/


--- On Wed, 9/2/09, Joseph Pica
<joseph.pica at gmail.com> wrote:
 
> I currently have a Victron BMV 600
> and am
very very happy with it.  It is a
> stand alone unit so can go on any system
as the smart shunt
> is installed
> between the battery bank and the positive
bus. (pay
> attention to the arrow
> on the shunt when installing as it is
directional or you'll
> read plus when
> minus and vise versa, don't ask how I
know:).
> 
> Joe