T&T: Airmar B744

[Peter Bennett]

I would guess that the cable is damaged - does the temperature change
if you unplug the cable from the instrument? (Is the cable connected
to the instrument?  :)  )

Tuesday, January 27, 2009, 11:36:03 AM, Steve wrote:

SS> I have an Airmar B744 thru hull speed/temp/sounder that I installed in
SS> 2007. It has quit indicating speed altogether even if the paddle is spun
SS> by hand under the boat. The temperature indicates 178F when the actual
SS> water temp is 67F. There is no paint gumming up the works, I carefully
SS> applied PropSpeed to the surfaces and tested the wheel prior to splash.

SS> Any suggestions?

SS> Steve Sipe
SS> Solo 4303 "Maerin"
SS> Lying Belle Is. Miami Beach


-- 
Peter Bennett, VE7CEI    Vancouver, B.C., Canada
Ennos 31 "Honeycomb"
GPS and NMEA info: http://vancouver-webpages.com/peter 
Vancouver Power Squadron: http://vancouver.powersquadron.ca