T&T: Results of shaft couplers inspection

[Truelove39 at aol.com]

Rich  -
 
Being  a belt and braces type, I suggest putting a hose clamp around the 
couplings in  order to absolutely prevent the pins from coming out. I have seen 
this  happen. It's cheap insurance.
 
Regards,
 
John
"Seahorse"
 
>  The practice here is to put a pin through the shafts and couplers at  the
front end of the split such that tightening the clamping bolts holds  the
pins in place.





**************New MapQuest Local shows what's happening at your destination.  
Dining, Movies, Events, News & more. Try it out!      
(http://local.mapquest.com/?ncid=emlcntnew00000001)