T&T: Installing an electric fuel pump for priming .....

[Elliott Bray]

Rich Gano wrote.....
......BIG SNIP.....

>That doesn't prevent you from mounting ANOTHER small "priming pump"
>BEFORE the primary filters if they are high-mounted.

In fact, I have a squeeze bulb (outboard motor gas line type) that I valve
into the feed line to the primary Racor(s) for filling them.

After a few squeezes fuel is at the top of the filter. Put the top on
loosely, squeeze a little more till fuel begins to overflow and tighten up.
Valve the bulb back out.
The squeeze bulb is not in the fuel line underway so I don't worry about it
rupturing or not meeting fuel line standards.

I've tried the 'carry a little fresh diesel and pour in the top' bit. That's
way too much hassle.


****************
Elliott Bray, wintering in Austin,TX
M/V Letitia - Gulfstar 44 MC
In heated storage in Whitehall, Michigan
www.loopcruiser.com
****************