T&T: ICOM VHF and DSC connection to plotter

[Ed Bruette]

 Ron, 

I have the M402 and can verify that it can transmit your coordinates.  I
don't have the manual in front of me so I can't confirm wire colors.  I
recommend you download the manual from Icom and read the DSC info.  Here's
the link to the d/l;
http://icomamerica.com/en/downloads/Default.aspx?Category=99


Ed, N7NVP
PT-38  "Makin' Do"
Poulsbo, WA
 
 

-----Original Message-----
From: trawlers-and-trawlering-bounces at lists.samurai.com
[mailto:trawlers-and-trawlering-bounces at lists.samurai.com] On Behalf Of ron
barr
Sent: Wednesday, June 04, 2008 9:00 AM
To: trawlers-and-trawlering at lists.samurai.com
Subject: T&T: ICOM VHF and DSC connection to plotter

Does anyone have a VHF radio Icom-  IC IC-M402? I know it transmits DSC MMSI
code but does it at the same time transmit my GPS position if I connect to
my Standard Horizon CP300 GPS plotter output (brown, yellow wires) which
apparently default to NMEA 0183? And I assume the inner wire on the ICOM RCA
jack is the positive NMEA input? Any feedback much appreciated. Thanks.
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

To unsubscribe or modify your subscription options (get password, change
email address, etc) go to:
http://lists.samurai.com/mailman/options/trawlers-and-trawlering

Trawlers & Trawlering and T&T are trademarks of Water World Productions.
Unauthorized use is prohibited.