T&T: Soundown adhesive

[Albin43SDtr]

'Lo All,

>Anyone have success with an adhesive to attach Soundown foam to engine room
>bulkheads?  Sounddown is a polyurethane.  I plan on backing up with
>insulation pins and/or ss screws with fender washers.


I liberally used 3M's Contact 80 spray-on adhesive to secure 
Sounddown to the aluminum panels in the generator sound shield. That 
was about 5 years or so ago. Still holding perfectly.


Take care and be safe.

Wayne
Celestial
Albin 43 Sundeck
Near Panama City, FL