T&T: 75 PSI relief valve for hot water heater needed

[Sandy Floe]

I operate a 10,000# antique 8X8 steam engine and associated boiler.  The 
relatively new 90# pop off valve on the boiler is a  "J.E. Lonergan Co." 
valve.

Googling that company gives some results that should help. Good luck.

Sandy and Dawna Floe
M/V Sea Eagle (39 CHB)
Day Island, WA

----- Original Message ----- 
From: <Truelove39@aol.com>
To: <trawlers-and-trawlering@lists.samurai.com>
Sent: Friday, May 18, 2007 1:31 PM
Subject: T&T: 75 PSI relief valve for hot water heater needed


> Does anyone have a source for a 3/4" 75 PSI temp & pressure relief  valve?
>
> Extensive Googling results in only 150 PSI models of the leaking Watts 
> 100XL
> valve I need to replace, and worse, it appears that Allcraft, the maker of
> the heater, is out-of-business, or at least unreachable. I need the 75 PSI
> valve  as the heater is rated 80 PSI working pressure.
>
> Thanks!
>
> John
> back aboard Seahorse in wonderful St. Augustine, FL and headed north 
> soon!
>
>
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.
> _______________________________________________
> http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering
>
> To unsubscribe send email to
> trawlers-and-trawlering-request@lists.samurai.com with the word
> UNSUBSCRIBE and nothing else in the subject or body of the message.
>
> Trawlers & Trawlering and T&T are trademarks of Water World
> Productions. Unauthorized use is prohibited.