T&T: Bone dry bilge pump

[Bob Peterson]

Uh, B Wayne, you might B skip the cost of the B pump and B buy a new
Bkeyboard insteadB!.

Bob PetersonB 

-----Original Message-----
From: trawlers-and-trawlering-bounces@lists.samurai.com
[mailto:trawlers-and-trawlering-bounces@lists.samurai.com] On Behalf Of
wabailey135@aol.com
Sent: Sunday, June 03, 2007 7:00 AM
To: trawlers-and-trawlering@lists.samurai.com
Subject: T&T: Bone dry bilge pump

The low spot in my bilge is inaccessable to a standard centrifugal bilge
pump.B  I want to suck that baby bone dry.B 

I believeB I remember reading thatB  I shouldB install a belt driven
diaphram pump.B  I also remember that one type is lots of trouble the other
is not (or less).B  Any recommendations? I will leave my high flow
centrifugals in as backup.

I want to just put an intake hose down in this tight spot in the bilge and
remote mount pump.B  How much lift can I expect to get on the suction side
for my remote mount?

Oh,B  my earlier posts had extraneous characters.B  Any suggestions on that
problem too?

Thanks,

Wayne
Bermuda
King Harbor
Redondo Beach, CA
AOL at AOL.com.
_______________________________________________
http://lists.samurai.com/mailman/listinfo/trawlers-and-trawlering

To unsubscribe send email to
trawlers-and-trawlering-request@lists.samurai.com with the word UNSUBSCRIBE
and nothing else in the subject or body of the message.

Trawlers & Trawlering and T&T are trademarks of Water World Productions.
Unauthorized use is prohibited.