T&T: [Fwd: Outlet Boxes]

[Peter Bennett]

Wednesday, January 3, 2007, 4:45:04 AM, Keith wrote:

K> Keep in mind that you should put GFCI outlets in wet locations like galley,
K> heads, engine rooms, etc. This will require the deep boxes. If you don't
K> install them now, a surveyor may require them later. This seems to be common
K> these days.

K> Keith

You only need to install a GFCI as the _first_ outlet on any circuit.
 As long as the other outlets are connected to the GFCI's "Load"
terminals, they will be protected by that GFCI.


-- 
Peter Bennett, VE7CEI    Vancouver, B.C., Canada
Lien Hwa 28 (AKA Polaris 30) "Sea Spray"
GPS and NMEA info: http://vancouver-webpages.com/peter 
Vancouver Power Squadron: http://vancouver.powersquadron.ca