T&T: Spring Lube & Filter Change Questions

[jag@vcn.bc.ca]

Hi Garrett

A suggestion. Since this is your 1st change on your Cummins. Check that
the dipstick is marked correctly as these were marked by the engine
installer.

If my memory is correct the "Add" mark should be at 13 US quarts, so after
draining as best as you can add 13 qts and check. Add two more and that
should be the "Full" mark. The filter doesn't count. Fill it separately.

The above is from memory. The procedure is in the manual.

John


> I'm about to do my first oil and filter change on the boat: Cummins 220