BST: Wanted - Ford Lehman crankshaft damper

[Mark/Susan Lindsey]

I have an early 1970's Ford Lehman 120.  My crankshaft damper (part of the
crankshaft pulley assembly on the front of the engine) needs to be replaced.

American Diesel doesn't have one.

There are a couple of different versions of the damper.  The one I have is
the older design, 10-5/8" in diameter.  The folks at American Diesel tell me
that the newer 9-3/4" damper will also work, as will the design where they
unitized the damper with the hub and the pulley into a single assembly.

The 10-5/8" damper, the 9-3/4" damper and the unitized assembly are all
shown in the Lehman Operators Manual, page A13 of the one I have, Parts Key
191 and 188.  If you have one of these laying around, please let me know.  

Thanks.  
Mark Lindsey
Anchorage, Alaska