[PCW] Nidacore

[Georgs Kolesnikovs]

From: "Pat Reischmann" <preischmann at msn.com>
To: <power-catamaran at lists.samurai.com>
Subject: Nidacore
Date: Thu, 5 Mar 2009 09:01:34 -0500


Brian, I have never had a problem with print through with Nidacore. I
attribute this to the polyester scrim, and the fact as with most builders, a
layer of mat goes on after the gelcoat. Nidacore makes a version designed
specifically for infusion as well.


>   ----- Original Message -----
>
>   Date: Wed, 04 Mar 2009 08:55:47 -0500
>   From: "brian eiland" <beiland at usa.net<mailto:beiland at usa.net>>
>   Subject: Re: [PCW] Nida-core, ground effect
>   To: Power Catamaran List
>
>
>   But it doesn't work too well with vacuum systems (infusion, etc), does it
>   Pat?
>
>   And there are some problems with 'print thru', particularly with
>   polyester resins and its honeycomb structure??
>
>   Brian


-- 
The reason the message was delayed and had to be manually relayed is 
that when the poster hit "reply," the entire previous digest was 
quoted, making the message way too long for the list server.
Digest subscribers need to NOT quote the digest in its entirety and 
they must insert as specific subject line.

I know that's a bit of a hassle but that's a side effect of being a 
digest subscriber. Digest subscriptions are not really intended for 
people who are active engaged in discussions.

--Listmeister