GL: Boat Name Removal

[Ralph Yost (home)]

Ken;
Use Acetone and a plain scotch bright pad. Get heavy rubber gloves. Wipe 
with Acetone then rub a section at a time. See pics attached.
Lots of hard work.
I wouldnt use OVEN OFF because you may harm the finish.
R.

----- Original Message ----- 
From: "Ken Tucknott" <katuck214 at mchsi.com>
To: "Great Loop" <great-loop at lists.samurai.com>
Sent: Thursday, April 16, 2009 5:31 PM
Subject: GL: Boat Name Removal


> Hello All,
>
> I need to remove the old name from the boat to make room for the new name.
> Black paint on white fiberglass gelcote.  It seems to me that I read some
> where that using Easy Off oven cleaner works best, but it needs to be
> unscented variety.  Do I have the facts straight, and is there anything
> special I should know about, about doing this project.  Any & all 
> suggestions
> will be greatly appreciated.
>
> Ken Tucknott
> Trista Gray
> _______________________________________________
> http://lists.samurai.com/mailman/listinfo/great-loop
>
> To modify your Great-Loop subscription options (change email address,
> unsubscribe, etc.) go to: 
> http://lists.samurai.com/mailman/options/great-loop 

[demime 1.01d removed an attachment of type image/jpeg which had a name of IMG_6764.JPG]

[demime 1.01d removed an attachment of type image/jpeg which had a name of IMG_6765.JPG]