GL: Bow Roller

[Jake2124 at aol.com]

The bow roller on my de Fever 41 is one that pivots down. It has two rollers, 
one smaller than the other, both bronz. The larger roller is forward. One of 
the flat head screws that goes into the front roller had fallen out, and I 
removed the other so I could see what the diameter and pitch was. In the process 
of removing the roller, I tipped it and the "axel" fell out. It is basically a 
stainless shaft, around 3 inches long, about 1/2 inch diameter( or maybe 
7/16), with 3/8 inch internal threads on both ends. I am aware that I could have 
one fabricated, but would just as soon buy a replacement from the manufacturer. 
The problem is, I do not know the manufacturer, nothing on the unit says who 
made it. I have seen the same roller on many boats, so it is common. Anyone 
know who makes it?

Brian


**************************************
Check out AOL's list of 2007's 
hottest products.

(http://money.aol.com/special/hot-products-2007?NCID=aoltop00030000000001)